Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 96169 | ELECTRIC BOAT CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFT | SECOND END KEYWAY DEPTH | 0.1390 INCHES NOMINAL |
| AMFR | SECOND END KEYWAY WIDTH | 0.2500 INCHES MINIMUM AND 0.2520 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| CSPY | LARGEST STEP DIAMETER | 1.2460 INCHES MINIMUM AND 1.2480 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| AMFZ | SECOND END DIAMETER | 0.9960 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 6.656 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 304 |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 0.8480 INCHES NOMINAL |
| AMDG | FIRST END KEYWAY DEPTH | 0.1030 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | INDENTED FLAT KEYWAY |
| ATPC | STEP QUANTITY | 3 |
| AAHP | SECOND END STYLE | INDENTED FLAT KEYWAY |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 1.4500 INCHES NOMINAL |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 2.0750 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.8720 INCHES MINIMUM AND 0.8740 INCHES MAXIMUM |
| AMFW | SECOND END DISTANCE FROM KEYWAY CENTER TO END | 2.2250 INCHES NOMINAL |
| AMCZ | FIRST END KEYWAY WIDTH | 0.1880 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |